Install Commercial Certificate

Follow this procedure to install a certificate for the Management Console website. After install, when you browse to the Management Console web address, the site will show as trusted.

If you have a certificate that is already generated (i.e. a wildcard certificate), you can use the Certificate Tool to install the certificate. This application appears in the path where you installed the server.

  1. Browse to the location where the server was installed (by default, Program Files ⟶ Ricoh ⟶ Streamline NX ⟶ tools ⟶ SLNXCertificateTool.

For Authentication Proxy server, go to Program Files ⟶ Ricoh ⟶ Streamline NX Authentication Proxy⟶ tools ⟶ SLNXCertificateTool.

  1. Double-click on the .exe file to launch the tool

  • If you are adding a certificate to a Core server, use SLNXCertTool_CORE.exe
  • If you are adding a certificate to a Delegation server, use SLNXCertTool_DS.exe
  • If you are adding a certificate to a Notification server, use SLNXCertTool_NS.exe.
  • If you are adding a certificate to an MIE server, use SLNXCertTool_MIE.exe
  • If you are adding a certificate to an Authentication Proxy server, use SLNXCertTool_AuthProxy.exe

  1. Set the value for "Trust all Certificates".

    It is recommended not to trust all certificates if you are configuring a cloud environment. However, If you configure the server to trust all certificates, you must also check "Trust all Certificates" on this tool.

  2. Click the Install Certificate option, and then browse to the location of your certificate.

  3. When prompted for a password, enter your password for the installation to proceed.

  4. Click OK to install the certificate and restart the service automatically.